Tinko HRTC-G1 hot runner control module is using a wide viewing angle LCD screen. It can display more information at the same time than the LED screen, such as soft start status, alarm information, etc. It supports RS485 communication, alarm output function and remote standby function. With these special functions, this excellent module can help you improve production automation and efficiency.
Color LCD display
Zone number display
1 or 0.1 unit display resolution
Load current / output percent display
Auto/Manual/Standby
Smart SOFT START function
Automatic switch to manual mode once sensor failure
High limit of output percent
Remote standby or alarm output (optional)
RS485 communication (optional)
Power Input | AC85~265V, 50/60 Hz |
Power Output | 240Vac, 15A, 3600W |
Power Consumption | 5W |
Sensor Type | J or K |
Temperature Unit | °C or °F |
Control Mode | Auto, Manual |
Output Mode | Phase Angle, Zero Cross |
Measurement Range | 0~500°C(32~932°F) |
Measurement Accuracy | ± 0.25% Full scale |
Setting Range | 0~450°C(32~842°F) |
Control Accuracy | ± 0.5°C |
Working environment | -0~55°C, 10~80% RH(No condensing) |
Communications | RS-485 (Modbus TCP) |
High/Low temperature alarm
Thermocouple open, reverse, short alarm
Heater open, short, overload alarm
Heating invalid alarm
Over-voltage protection
Overload protection, cut off output
Short circuit protection, cut off output
Triac damage protection, cut off output
